Bicycle Tools and Maintenance (NC)

The home-mechanic’s dream tool, the Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The DELUXE version is completed with cycling-specific bits and comes into a practical wrap package. Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves. Easy to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the...

Genuine Park. This cassette removal tool is Campagnolo specific, heat treated and can be used in either a wrench or a bench vice. It fits all Campag cassette lockrings and certain Campag bottom brackets. Key Features: Compatible with all Campagnolo cassette lockrings including 11 speed. Also fits the following Campagnolo bottom brackets: Record, Chorus, Centaur and Athena. Thin wall construction allows it to be used without removing the cones and locknuts. Heat treated alloy is tough and dependable, that's why Park Tool are the choice of mechanics all over the world. Can be used in either a bench vice or a wrench using...

The Park Tool CC-3.2 Chain Wear Indicator is a useful tool that allows you to find out how worn your chain is before you need to change it. A worn chain not only shifts poorly and wears down sprockets at an accelerated rate, but it also causes damage to other components of the drive chain. To use the CC-3.2 Chain Wear Indicator, simply insert the tool into the top of the chain and read the measurement. If the chain reaches between 0.75% and 0.5% then the chain is worn or beginning to reach its end and needs to be replaced before other chain components are affected too. - R.K. Key Features: CC-3.2 Chain Wear Indicator by Park...

Ideal for use on carbon fibre handlebars, stems and seat posts, our carbon assembly paste is a specially formulated blend of 100% renewable, natural oils and ultra-fine non-slip pumice particles. designed to eliminate slip between carbon fibre components, Gripper paste increases the friction between carbon fibre components and their mating surfaces, so reducing the torque required to clamp them. Our non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions.

Shop quality screwdriver with dual density grips for greater comfort and control Heat-treated, chrome vanadium shaft for strength and a precise tip 6 mm flat blade tip Covered by Park Tool's legendary limited lifetime warranty

Everything you need to complete your tubeless ready wheelset. In this pack you will find everything you need to complete your tubeless ready wheelset as well as detailed instructions of how to do it. Contains: x2 2oz Sealant – Pre-measured and ready to apply to one road bicycle tyre – seals punctures up to 6.5mm virtually instantly. Can be applied directly through valve using the tapered nozzle by removing the valve core x1 Rim Tape – 10 yard roll of lightweight rim tape, used to make your tubeless rims air tight. Enough to tape 2 road rims with a double layer x2 Presta Valves – Valve stems with removable valve cores....