Use the EK Cooling EK-ACF Fitting in your water-cooling loop with all types of flexible tubing. These fittings are available in a variety of colours so you can match them with your build. Made of nickel-plated CNC machined brass with rubber O-rings, you get a tight seal.
The Phanteks Digital 3 Pin RGB LED Extension Y-Splitter Cable is specially designed for use on motherboards with ASUS Aura Sync Addressable and MSI Mystic Light Sync Rainbow certified.It can be used to control and customise RGB LEDs directly from the motherboard.
Made of nickel-plated brass, the Phanteks Glacier 13/10 mm Compression Fitting has an aluminium nut that securely holds your soft tubing in place.You can tighten the connections with an 8 mm Allen key.
Add some flashes of colour to your PC case with the Phantek Digital RGB LED Strip. Each strip is lit up with 30 LEDs, so you'll get bright light and smooth colour flows.You can easily customise the light show by syncing the lights with a D-RGB motherboard or Phanteks D-RGB Controller.
Add some flashes of colour to your PC case with the Phantek Digital RGB LED Starter Kit.With all the cables, adapters and LED strips included, this handy pack has everything you need to make your PC case standout with exciting colour modes and patterns.You can easily customise the light show with the included D-RGB controller, and a simple 3-button remote means it's no fuss to play around with the lights once it's set up.
Create vibrant and unique lighting effects with the Corsair LL 120 120 mm Case Fan. With 16 independent RGB LEDs on two separate light loops, you can create stunning visual effects to make your PC look as good as it performs.Featuring enhanced fan speed control, you can keep your PC running at its optimum no matter what you're doing. If you're watching a movie or working on an essay, you can turn the fan speed down for less distraction from whirring fans. When it's time to boot up a game, you can turn the fan speed up to a maximum of 1500 RPM to prevent over heating and keep everything cool. Engineered for low-noise, the Corsair...
Use the EK Cooling EK-ACF Fitting in your water-cooling loop with all types of flexible tubing. These fittings are available in a variety of colours so you can match them with your build. Made of nickel-plated CNC machined brass with rubber O-rings, you get a tight seal.
The Phanteks Glacier C350A CPU Water Block keeps your PC cool and working as it should. With a larger copper base and cooling fans that sit closer together, the C350A keeps the heat away, even when you're overclocking.VITON sealing is also used in automotive and aerospace industries, so you know you're getting extreme durability with seals that can withstand the heat.Add striking colour effects with the integrated RGB lighting. Sync it to your other accessories with msi Mystic Light and Asus Aura Sync.
Use the EK Cooling EK-ACF Fitting in your water-cooling loop with all types of flexible tubing. These fittings are available in a variety of colours so you can match them with your build. Made of nickel-plated CNC machined brass with rubber O-rings, you get a tight seal.
Looking for the right tubing for your build? EK Cooling Duraclear Tubing is flexible enough to handle tight turns in your liquid cooling system.Want to prevent bacteria? It won't be able to cling to the smooth inner walls. Duraclear Tubing is also transparent, so you can use coloured Ekoolant liquid.
Use the EK Cooling EK-ACF Fitting in your water-cooling loop with all types of flexible tubing. These fittings are available in a variety of colours so you can match them with your build. Made of nickel-plated CNC machined brass with rubber O-rings, you get a tight seal.
Fill your liquid cooling loop with the Mayhems X1 Premixed Watercooling Fluid. It's non-toxic and almost fully biodegradable, protecting against corrosion and slime.This bottled cooler comes premixed with UV yellow-green colour to make your PC build stand out.Safety first - don't forget to read the instructions.
The EK Cooling EK-PLUG G1/4 Stop Fitting Sealing Plug is made of high-quality acrylic material and sealed with a rubber gasket. You can also install one 5 mm illumination LED.
Indispensable as masking in soldering and powder coating, iFixit Polyimide Electrical Insulation Tape offers high temperature resistance and excellent thermal conductivity. Each roll has 108 feet of tape and comes with a lifetime guarantee.
Attach the CableMod WideBeam Magnetic Series RGB LED Kit to your PC case for an amazing effect. It brings you brighter, more vibrant colours and a much wider beam angle.The rare-earth magnets enable a secure fit and it comes with a SATA power connector for modern power supplies.Moreso, it's fully chainable so you can put multiple LED strips together.
Whether replacing your current cooling or building a PC from scratch, the Fractal Design Celsius S36 CPU Water Cooler makes your setup that much easier. Most of the cables are concealed within the hub, so only the ones that you need to connect are visible. And if it's your first time installing a water cooler for your processor, there's helpful instructions included to walk you through the process. No one wants to add fan noise to their build. Which is why the Celsius S36 has clever sound dampening materials, so the three fans will run smoothly and quietly. The fan speed also adjusts automatically, so if you're just watching a...
With four stainless-steel probes, the iFixit Probe and Pick Set is good to have around for precise scraping, cleaning, probing, o-rings, springs, and other small, detailed tech jobs.
The EK Cooling EK-Torque HTC 14 mm Compression Fitting is a great choice for your custom hardline liquid cooling system. With a simple design this won't take the spotlight from your elaborate tubing. And their locking ring makes sure your tubes won't get pulled out accidentally.
Made of nickel-plated brass, the Phanteks Glacier 16/10 mm Compression Fitting has an aluminium nut that securely holds your soft tubing in place.You can tighten the connections with an 8 mm Allen key.
The handy EK Cooling Water Blocks Filling Bottle makes the loop filling process easier.It works as a vacuum - just squeeze the bottle to fill those crammed fill ports or suck coolant out of the reservoir.No need to use a screwdriver to pop off the reservoir cap. The narrow telescopic tube fits down into those remote areas.
Control the RGB lighting in your PC build with the Phanteks RGB Controller Hub.You can connect your Phanteks D-RGB products with compatible motherboards (all sold separately) to stay in complete control of the lighting. With two 40 cm D-RGB LED strips and an adapter, you can light up your build to create a distinctive look that matches your style.
The Alphacool CKC Cape Kelvin Catcher Coolant is specially made for your PC's cooling loop. It contains anticorrosive particles that put a stop to bacteria growth. The coolant is transparent, non-irritant, non-flammable and eco-friendly.
The EK Cooling EK-HTC Classic 12 mm Compression Fitting is a great choice for your custom hardline liquid cooling system. With a minimalistic design these don't take the spotlight from your elaborate tubing. And their locking ring makes sure your tubes won't get pulled out accidentally.
