BMX Hub Spares

The Hex Lab 3/32" Titanium Cogs are CNC-machined from bulletproof titanium. They are designed to fit Shimano compatible cassette hubs and have a 5mm wide inner base, giving a more solid interface with the cassette body.

Replacement bolt-in female axle kit for popular Profile cassette hubs.

Replacement bolts for Profile AC-2 or Elite 15/20 Hubs. The bolts are precision machined from 7075 Aluminium with a black anodized finish and laser etched graphics. Different options available for all hub and dropout configurations. -Sold as set (2pcs) -Includes Aluminium washers -Use 10mm hex key Note: These will not work with regular Elite hubs

Replacement cones for the Cinema FX Front Hub.

Replacement aluminium centre axle for Profile Racing Mini and Totem rear cassette hubs. Axle only (no hardware).

Profile Racing’s Chromoly Hub Axles are precision CNC machined and heat treated for unmatched strength and durability.

Replacement bearing for the drive side of the Cinema FX2 Rear Hub.

Replacement one piece driver for Odyssey Cassette Hubs.

Replacement bearing set to fit the Eclat Cortex freecoaster hub

Lightweight 7075 aluminium cog from Onyx. Compatiable with Onyx hubs and Shimano type cassette bodies.

Replacement Hub bearings to fit the Eclat ulse, dynamic & blind hubs.

Replacement Clutch for the West coaster hub.

Box One Single-Speed Cogs are CNC-machined from chrome-molybdenum and are designed to fit Shimano-compatible cassette hubs and have a 5mm wide inner base, giving a more solid connection to the cassette body. The chromoly cogs have an ED finish with laser-etched logos.

Replacement 9T driver for the BSD revolution hub.

A pair of lightweight 17mm axle nuts. Available in 10mm and 14mm in various colors!

Replacement bearings for the WTP Hybrid Rear hub.

Replacement drivers for the Profile Elite Hub. Six-Pawl design. Available in CrMo steel. Single speed driver with Shimano compatible splines also available.

The Slack Cam Ring is one of the key components in the Profile Z Coaster® hub. It determines the amount of “Slack”or “Free Pedal” needed to engage/disengage the freecoaster mechanism. Slack Options: 20/33/45 Degrees (45 degrees = 1/8 of a crank), 60 Degrees (1/6 of a crank), 75 Degrees (1/5 of a crank), 90 Degrees (1/4 of a crank), 115 Degrees (1/3 of a crank). RHD or LHD available - Be sure to order correct drive side

Conversion kit includes 2 bolts of your choice with 2 chromoly washers, 2 cone spacers with anti slip steel washers, and 1 chromoly axle.

Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium Female Flush Button Hub Bolts are made from high-quality grade 5 titanium with an average 40% weight saving when compared to the steel alternative. These hub bolts will fit all female hubs that use a 3/8” x 24tpi thread bolt. With a super flush design with 8mm allen key they are the perfect choice for riders who ride no pegs and want the cleanest looking bike! When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold...

Replacement chromoly driver for the Profile Z Coaster hub. Includes driver, friction O-Ring, and two (2) MFG #6802 driver bearings

Lightweight aluminium axle nuts with a 17mm hex size. Available for 3/8” and 14mm axle sizes, sold in pairs.

6Al4V Titanium or Aluminum 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included.

Six pawls with 140 points of engagement per revolution. Two fully sealed Enduro bearings. Hardened S-7 Tool Steel outer cog driver-20.2mm width. Titanium threaded inner body driver-16.5mm width. Easily serviced and completely rebuildable. 3/32_ tooth width- Will fit either 3/32_ or 1/8_ chains.