BMX parts

The Profile Mini Rear Cassette Hub is hand made in the USA, setting the benchmark for cassette hubs thanks to being the very first one. Refined over the years the hub features a heat treated Crmo 14mm hollow axle with 17mm nuts. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. Please note: This is the male axle version, sold standard with a 14mm hollow male axle (you can upgrade to titanium at checkout) drivers from 9t through to 18t. Select your drive side and colour and then select your driver option at checkout. Titanium Upgrades also available. ...

If your Shadow Conspiracy Sabotage Guard is coming to the end of its life it's time to get that thing replaced already! Luckily Shadow make a direct replacement for the Sabotage Guard Sprocket, buy one and get back to those ledges.. ###section### Product Specs TYPE: N/A MATERIAL: Nylon WEIGHT: 77g (2.72oz)

Tioga's Fastr X S-spec Race Tyre is a highly versatile tyre that strikes a balance between speed and control. A versatile front and rear tyre option that's built with GripPod technology and Nano Knob tread design that increases traction through corners and under hard acceleration. The centre tread is kept smooth to keep rolling resistance to a minimum. Max pressure rating: 110 psi ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 110 PSI WEIGHT: 330g (11.6oz) - 380g (13.4oz) PACK SIZE: Single

Wethepeople always make sure their new products are thoroughly put through their paces by their team riders, always ensuring their parts are built to last. The brief was a simple, good looking but strong and dent-resistant sprocket for all kinds of riding. It's built from fully machined 6061-T6 alloy that's 6.35mm thick with a wider spoke design to increase rigidity. The Wethepeople Logic Sprocket features adapters to fit 19mm, 22mm and 24mm cranks. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 79.4g (2.8oz)

Leopard print pivotal seat from Bone Deth with a hollow bolt to save some weight! Weighs 11.4 oz" ###section### Product Specs TYPE: Pivotal PADDING: Slim WEIGHT: 11.4 oz"

All the bits you need for a replacement Euro BB. The cups are machined in the USA from 6061 aluminium and hold 2 sealed bearings each. All mounting hardware included. Fits Profile and other 19mm style cranks.

Replacement titanium driver for the Profile Z Coaster hub. Includes driver, friction O-Ring, and two (2) MFG #6802 driver bearings

Alloy hub shell, crmo axle, alloy cones. Size: 3/8 male axle, 36 hole only. Bearings: fully sealed bearings. Colors: Black / Oilslick. Features: slim low flange hub, cnc cones, compatible with Saltplus PRO Nylon hubguard. ###section### Product Specs AXLE SIZE: Male SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 299g (10.55oz)

Primo's Balance V2 Freecoaster Hub is a classic freecoaster design decked out in matte black and finished with Primo's OG Dragon Logo. The hub shell is CNC machined from 6061-T6 aluminium paired with a CNC machined chromoly male 14mm axle with chromoly axle nuts. The Balance Hub features an internal clutch system, which doesn't use springs or balls on the axle making it more reliable and less prone to breaking and a 1-piece driver with an oversized needle bearing for increased durability. The Primo Balance V2 Freecoaster Hub comes with two updated nylon Primo hub guards. ###section### Product Specs HUB TYPE: Freecoaster ...

Replacement Axle for Cinema's FX Front Hub.

Long seat post from Éclat. The post is 230mm long, featuring a star shape wall structure for added strength and a CNC finish. ###section### Product Specs TYPE: Pivotal LENGTH: 230mm DIAMETER: 25.4mm WEIGHT: 131g / 4.62oz

New affordable lightweight rim from Fly. The Piramide rim features a piramide structure which is triple pinned at the join. Available in a brake-less version with a low profile 17mm side wall or a brake friendly version with a 21mm side wall ###section### Product Specs WHEEL SIZE: 20" SEAM: Pinned ERD: 389mm HEIGHT: 21mm WIDTH: 34mm SPOKE HOLES: 36h WEIGHT: 502g / 17.7oz

Disc ready rear hub from Stay Strong. Alloy fully sealed 36 hole with a hollow axle. 6 Pawl with 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Alloy female hollow axle DRIVER:16T SPOKE HOLES:28 WEIGHT:413g

The Troy Lee Air Gloves give you dexterity and a perfect fit for warmer riding conditions. Robust, breathable and phone friendly, these are an indispensable, all purpose staple. Created and constructed in line with Troy Lee's drive to provide the very best kit available, the Air Gloves are contoured so as to give the perfect fit on the bike. Size Guide: Small = 6.5-7.5" (16.5cm-19cm) Medium = 7.5"-8.5" (19cm-21.5cm) Large = 8.5"-9.5" (21.5cm-24cm) X Large = 9.5"-10.5" (24cm-27cm) Measure circumfereance of the palm

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI’s superior rubber material. The flangeless design features a generous 160mm (6.3”) width and super comfortable 30.5mm (1.2”) diameter. Thin mushroom style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip, while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug style barends. ###section### Product Specs DIAMETER: 30.5mm LENGTH: 160mm PACK SIZE: 2 (Pair)

Fat size pivotal seat from the Stranger. The Logo seat features a synthetic fiber top cover and white stitch detailing with a black rear bumper and black stitched Stranger logo. ###section### Product Specs TYPE: Pivotal PADDING: Fat WEIGHT: 312g / 11oz

Replacement driver side bearing for the FX2 Freecoaster Hub and FX2 Freecoaster wheels.

Replacement axle/cone set for the WTP Arrow rear hub.

Heavy duty all round intermediate rim from Alienation. The rim features a wide 33mm profile, double walled construction and is pinned at the joint instead of welded to keep the cost down. The rim is available in 36 hole only ###section### Product Specs WHEEL SIZE: 20" SEAM: Pinned ERD: 395mm HEIGHT: 15.8mm WIDTH: 33.4mm SPOKE HOLES: 36h WEIGHT: 430g / 15.2oz

The 333 rim is a pinned double wall rim made from 6061 aluminum. The 333 rim features a deep concave center for increased strength and stiffness. Comes with thick cinema rim tape. ###section### Product Specs WHEEL SIZE: 20" SEAM: Pinned ERD: 396mm HEIGHT: 17mm WIDTH: 31mm SPOKE HOLES: 36h WEIGHT: 473g

Stay Strong's lightweight, premium quality BMX/MTB gloves feature an updated Clarino fabric palm to provide grip, durability and ventilation, a soft lycra back for improved comfort, stretch and closer fit and silicone print fingers to help ensure maximum grip on the brake lever. All gloves come with an adjustable wrist strap for extra comfort and are touch screen compatible for use with your phone.

The washable slip-on Joint knee sleeve provides lightweight, low-profile Softshell protection with maximum flexibility. A vented mesh back and flexible lycra sleeve give this easy-to-ride pad its perfect fit and flexibility, while articulated soft padding delivers reliable crash protection with outstanding freedom of movement.

JJ's Singnature grips are molded from medium density krayton rubber featuring a Tetrahedron pattern for maximum grip and comfort. Push-in nylson bar ends with puncture reducing washers included. ###section### Product Specs DIAMETER: 31mm LENGTH: 147mm PACK SIZE: 2 (Pair)

The Cult Crew Freecoaster Hub uses the normal KHE style internals, while Cult went the extra mile to make sure all the hardware is bombproof too. Built from 6061-T6 aluminium alloy for the shell with a heat-treated 14mm chromoly axle creating a solid, durable hub. The Crew Freecoaster includes a 9 tooth driver and fully sealed bearings throughout, adjustable slack by removing or adding slack washers internally. The Cult Crew Freecoaster Hub comes with a non-drive side nylon hubguard. ###section### Product Specs HUB TYPE: Freecoaster AXLE: 14mm Male DRIVER: 9t DRIVE SIDE: Left Side Drive SPOKE HOLES: 36h WEIGHT:...