BMX parts

The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm chromoly inner axle provides plenty of strength for all the grinds you can throw at it. ###section### Product Specs AXLE SIZE: SPOKE HOLES: BEARINGS: WEIGHT:

Simple, strong and fast front hub with low flanges and optimal spacing. CNC'd from 6061 aluminum with a chromoly female axle. With two high quality Japanese bearings these hubs roll forever. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 292g (10.3oz)

CNC machined from aircraft quality billet 7075 aluminum plate the Profile Elite 104 BCD 4-Bolt Chainring is incredibly durable with an open design to reduce the weight as much as possible without sacrificing strength The chainring has an offset centerline and is reversible so you can dial in your chainline with ease, it's a 4-bolt design and features a 3/32″ tooth width for use with most race or MTB chains.

The Itsy grip is a 175mm long flangeless grip with a simple and comfortable geometric design. Made with a soft kraton rubber compound and includes ultra durable Merritt Insert Bar Ends. ###section### Product Specs DIAMETER: TBC LENGTH: 175mm PACK SIZE: 2 (Pair)

The Wethepeople Logic Stem is a clean and simple top load stem with a slightly lower 27mm rise. It's built from fully CNC machined 6061-T6 alloy for strength with machining to reduce weight. The Logic Stem features a wider 48mm cap and larger head bolts for improved clamping power, while Shark Tooth Clamping (STC) linear knurling prevents bar slip. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 27mm CLAMPING DIAMETER: 22.2mm WEIGHT: 340.2g (12oz)

BSD's Substance Cranks utilise a 2.5 piece design for ease, securing the whole crank set with just one bolt. The arms are made from heat-treated 4130 Chromoly with a rectangle cross section for extra stiffness and a beefy pedal boss for increased strength with an angled back for frame clearance. The heat-treated spindle features a 22mm diameter and 48 splines. The BSD Substance Cranks are both RHD and LHD compatible and now come with a free installation tool. ###section### Product Specs Crank Type: 2.5 Piece Drive Type: Bolt Drive Spindle Diameter: 22mm Drive Side: Left & Right Compatible Includes BB Bearings: No ...

Tioga's Spyder Dazz Lite Pedals boast an extremely tough and ultra-durable composite plastic body construction with that iconic spider-web pattern across the platform that eliminates weight without sacrificing strength or rigidity. They boast a low-profile body and slim line platform design, boron axles and 12 molded traction pins. The 2DU bushing system has a low friction coating to ensure they stay smooth. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Metal BEARINGS: Sealed PACK SIZE: Pair WEIGHT: 240 g

Adapts the AC-2 hubs 15mm threaded axle to use 3/8 (10mm) bolts. -M15mm x 1.5 external threading with 3/8-16 interal threading -Sold as set (2pcs)

The Stay Strong Reactiv Rim features an aero profile design with a pinned joint and a CNC machined braking surface on the rear rim with Stay Strong cut of graphics. ###section### Product Specs WHEEL SIZE: 24" SEAM: Pinned ERD: TBC HEIGHT: 20mm WIDTH: 29mm SPOKE HOLES: 36 WEIGHT: 485g

The Devon Smillie signature line has been very popular, and Fly decided to bring all of his signature products under the Fuego line. They’ve refined the original Devon seat to give it a Fuego touch. The Fuego Tripod Seat will match perfect with Devon’s frame, grips and tyres! ###section### Product Specs TYPE: Tripod PADDING: Fat WEIGHT: 283 g / 9.9 oz

Layback seat post from Éclat. The Torch15 post features a 15mm offset which gives you more layed back position compare to a standard pivtal post. The post has a star shape wall structure for add strength and is made from 6061-T6 3D forged aluminum then CNC'd finished. ###section### Product Specs TYPE: Pivotal LENGTH: 230mm DIAMETER: 25.4mm WEIGHT: 4.6oz / 131g

Double wall rim from Fitbikeco, Made from 6061 T-6 Aluminum and Features a sleeved and welded seam for extra strength ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 390mm HEIGHT: 17mm WIDTH: 34mm SPOKE HOLES: 36h WEIGHT: 489g / 15.75oz

Stainless steel double butted spokes are lighter than regular spokes but are still durable, it is a great way to shave some weight of your wheelset ###section### Product Specs TYPE: Butted MATERIAL: Stainless Steel PACK SIZE: 20 NIPPLES: Brass Nipples WEIGHT: TBC

Eric Lichtenberger signature seat from Stranger. Faux crocodile skin cover, Slim pivotal design and is available in black or brown. ###section### Product Specs TYPE: Pivotal PADDING: Slim WEIGHT: 259g / 11.25oz

The Fuse Pro Shin Pad boasts a complete redesign massively upping the comfort, durability and impact protection over any previous versions. Constructed from perforated neoprene with an air plush liner for maximum comfort and super stretchable neoprene straps locking the pads in place. For protection against pedal bites and other nasty impacts to the shin the Alpha Pro Shin Pads utilise a nylon hard shield with an EVA foam backing and a super durable rip stop 1100D Cordura fabric across the front. Extra padding has been added to the inside to give the inner part of your legs protection when catching tailwhips, the new...

Hex Lab Titanium Lock Rings are designed for racers who are after the best of the best. Box focus on the cog to lock ring interface as they follow the load paths down the hubs and cogs. With a large surface area on the lock ring flange keeping the cog properly tightened, you can be sure that all of the power you put through the pedals is keeping you at the front of the pack.

Affordable and durable disc sprocket from Verde. The Regent sprocket is forged and then CNC'd from 6061 aluminium and comes complete with 19mm and 22mm adapters. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC

The United MDLCLS Sprocket Guard is a direct replacement for their 'Middle Class' Sprocket, built and designed to not take anything away from the original design. The MDLCLS Guard is built from CNC machined 6061-T6 alloy to ensure it can take whatever is throw its way. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 110g (3.92oz)

Replacement pawl set for the WTP Supreme/Arrow Rear hub.

Freshen up the mounting hardware on your spindle drive with a pair of Mission Spindle Bolts. Mainly built to replace worn or broken Mission Transit Cranks, though it will also work well with others.

Limited edition re-run of Randy Brown's signature grips made in the USA by ODI from a super soft compound featuring MX inspired "Pillow Top" pattern. ###section### Product Specs DIAMETER: 29mm LENGTH: PACK SIZE: 2 (Pair)

Lightweight plastic pivotal race seat from Stay Strong. Length: 8.25"/210mm, width: 4.3"/110mm. ###section### Product Specs TYPE: Pivotal PADDING: Plastic WEIGHT: 171g

David Grants signature grips from BSD. Basketball inspired grips, featuring a super slim design covered with grippy b-ball bumps these handles will have you aiming for rails not hoops. Comes complete with colour matched Plastic BSD barends. Dunks grip Features: flangeless‚ dunks‚ basketball design dunks bar ends with internal washers, soft krayton rubber. ###section### Product Specs DIAMETER: 27mm LENGTH: 160mm PACK SIZE: 2 (Pair)

Rant consistently push the mantra that everyday is a great day on your bike and it's hard to argue. Their H.A.B.D Sprocket is forged from 5mm thick 6061 alloy with a light CNC clean up, smiley face cutouts throughout the sprocket shed some weight while still retaining strength and function. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 81.6g (2.88oz)