Bicycle Components

The Wave 6 Headset helps you get your stem almost flush with your headtube thanks to the low-stack 6mm topcap. For those wnaitng a super clean, minimalistic look, the Wave 6 is one of the lowest stack headset caps on the market.

Trebol might be Fly's mid-priced parts range but that does not mean that these parts are in any way inferior! The Trebol FL Stem is built from forged 6061-T6 aluminium for durability with sidecuts that help reduce the weight. Trebol ensured the FL Stem has all the bulk where it's needed while keeping a simple and clean look. ###section### Product Specs TYPE: Front Load REACH: 50mm RISE: 6mm CLAMPING DIAMETER: 22.2mm WEIGHT: 280g (9.92oz)

Replacement bearing for the drive side of the Cinema FX2 Rear Hub.

This Tubular Road Tyre from Vittoria is a firm favourite amongst road cyclists thanks to its Graphene 2.0 and 4C compound and lightweight construction. Featuring enhanced rolling and control, this sturdy tyre is set in 320 TPI casing for reliable race-ready control you can count on.

Our very own pack of 40 Titanium spokes with Brass Nipples. Super strong and super light when compared to regular steel spokes. Available in the most popular sizes for 36 hole BMX Wheel-builds. We can build these up on to a wheel for you when you buy any rim and hub at the same time. The weight saving by using Titanium spokes is roughly 76g / 2.6oz per wheel

The Chroma series takes Fuse's glove line and injects a vibrant and exciting selection of colours and flavors to suit every rider. Using the highest quality materials and a rider tested slim fit, the Chroma glove is the perfect handwear for the rider wanting a glove with no compromises but also wanting to standout from the crowd.

Wide link design 105 double front derailleur for increased rigidity and improved shifting response Wide inner link increased rigidity and takes front shifting performance to a new level, especially under heavy load For 11-speed drivetrains Toggle link design is light action with short lever movement and less effort at the end of shifting stroke Designed to work with the wider gear pitch spacing Shimano chainsets without sacrificing shifting performance on bikes with 135 / 142 mm O.L.D. Support bolt provides added stability Maximum capacity of 16 teeth with 46-53 tooth outer The aluminium parts are coated to resist...

The Rude Tube LT peg has been updated - with a new shape chromo adaptor and a thicker 7075 peg, it makes the peg much more durable than the original V1 version. It uses the same plastic outer as the Rude Tube but has a lighter 7075 alloy inner with a heat treated chromo adaptor at the dropout interface. Weighing 33% less means you can run 4 pegs with the equivalent weigh of just over 2.5! Please note: The BSD Rude Tube LT Peg is sold individually. ###section### Product Specs LENGTH: 4.2" (106.6mm) DIAMETER: 37mm MATERIAL: Plastic AXLE SIZE: 10mm / 14mm PACK SIZE: 1 (Single) WEIGHT: 170g (6oz)

The Radio Race Neon Pro Stem is about as professional as it gets, utilising a custom CNC machined construction from a single block of raw 6061-T6 alloy that offers precision fit and grip on your bars. It also features a wider faceplate to provide extra clamping power, an offset rear slot to improve clamping and with a choice of sizes available it's easy to dial in your preferred front end setup. Please note: This stem has an oversized clamping area and will only fit handlebars with the matching 31.8mm thickness. ###section### Product Specs TYPE: Top Load REACH: 48mm, 54mm and 60mm options RISE: 26mm CLAMPING...

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reach adjustment for accurate positioning and a barrel adjuster to fine tune cable tension.

The Mike Hoder signature 710 chain by KMC is designed with a heavy duty structure to stand up to the toughest street abuse. The design eliminates stretch and chain drop. The mushroomed riveting provides extra strength. Available in black. Weight: 292g / 10.3oz

A super thin grip with a unique Ripple profile for a more direct thin feel to the bars. Made from a super soft rubber compound. ###section### Product Specs DIAMETER: 27.5mm LENGTH: 160mm PACK SIZE: 2 (Pair)

Replacement one piece driver for Odyssey Cassette Hubs.

Introducing BSD’s first ever rim. The NASA rim is designed to be stiff both laterally and radially. Based on an I-beam design with extra thick tapered sidewalls, tapered spoke seats, cross over lacing and a curved inner strut. Intergalactic. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 388mm HEIGHT: 18mm WIDTH: 36mm SPOKE HOLES: 36h WEIGHT: 498g

Cult's Panza Conviction Guard Sprocket is an insanely strong piece with an oversized full guard. Made from 7075 aluminium that's strong and durable with a nylon sprocket guard that adds protection to your cranks and chain. The Cult Panza comes with adapters so you can run the sprocket on 19mm, 22mm and 24mm spindles. ###section### Product Specs TYPE: Replacement Guard MATERIAL: WEIGHT: 117.9g (4.16oz)

The Box Five cranks are a 3 piece alloy sqaure taper design, made with a durable cold forged construction from 6061 T-6 Aluminum. ###section### Product Specs Type:3pc Spindle Diameter:24mm Includes BB Bearings:No Weight:TBC ###shogun-image-section###

The Demolition x Markit v2 Stem is a classic top load style with a chamfered and rounded design. Its 6061 aluminium construction features extensive internal and external machining to reduce weight without sacrificing strength. A recessed fork top cap area keeps your setup looking clean while the 45mm extra wide clamping area locks down your bars. ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 32mm CLAMPING DIAMETER: 22.2mm WEIGHT: 306.2g (10.8oz)

Grind lord Tam Roulston's new signature BSD Roastin' Pegs are here. This super-tough, heat-treated 4.5" peg is crafted from double-butted 4140 chromoly for unmatched strength and durability. Built to withstand the harshest grind sessions. ###section### Product Specs LENGTH: 4.5" (114.3mm) DIAMETER: MATERIAL: Chromoly AXLE SIZE: 10mm or 14mm PACK SIZE: 1 (Single) WEIGHT: TBC

Troy Lee Designs gloves are all researched, designed and tested before making their way onto the hands of the world’s greatest riders. The Flowline Glove features a Velcro cuff and single layer palm for breathability. Micro-mesh is used all over for ventilation. Size Guide: Small = 6.5-7.5"(16.5-19cm) Medium = 7.5-8.5" (19cm-21.5cm) Large = 8.5"-9.5" (21.5cm-24cm) X Large = 9.5"-10.5" (24cm-27cm) XX Large = 10.5"-11.5" (27cm-29cm)

This flangeless mushroom style grip is made in the USA by ODI grips using their super soft rubber compound which combined with clats specially designed rib profile, makes for their best feeling and longest lasting grip yet. Includes the new USA made Éclat nylon barends. ###section### Product Specs DIAMETER: 29.5mm LENGTH: 165mm PACK SIZE: 2 (Pair)

Alloy seat clamp from Salt. The Am seat clamp is made from 6061 T6 alloy with a CNC finish and features a simple slim one bolt design. Size: 25.4mm. Weight: 18g / 0.63oz.

Replacement bearing set to fit the Eclat Cortex freecoaster hub

The Primo Balance Cassette Hub is a classic Primo style that's high performance and equipped with Primo nylon hubguards keeping your hu protected from grinds. It's built from 6061-T6 alloy for the shell that's paried with a hollow chromoly 14mm male axle with 6mm allen broach, finished with chromoly 17mm nuts. The Balance also features a 1-piece sealed bearing 9 tooth driver with 3 pawls boasting 3 engagement teeth per pawl. ###section### Product Specs HUB TYPE: Cassette AXLE: 14mm Male DRIVER: 9t DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: 595g (1.31lbs)

Built from strong lightweight cro-mo that's paired with Fit's durable, proprietary sleeve material to create one fast-grinding, long-lasting, smaller-diameter stunt stick! A hidden 4130 ring insert helps keep the sleeve from crushing or coming off and limits slipping. Please note: The Fit Ethan Sleeper Peg is sold individually. ###section### Product Specs LENGTH: 4.25" (108mm) DIAMETER: MATERIAL: Metal peg/Plastic sleeve AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 1 (Single) WEIGHT: