Bicycle Components

Race Face Single Rings - Now with performance enhancing chain retention technology. Burly enough for DH Racers and Dirt Jumpers, yet light enough for XC / singlespeed. Single Rings are machined from 7075 aluminum and tested in some of the most punishing riding terrain - Built to last. Features: Narrow Wide tooth profiling ensures ultimate chain retention. Stiff 4mm plate thickness and I-beam construction transfer loads without flexing. 7075-T6 aluminum, aerospace grade strength. Reversible laser etched graphics. Compatible for 9, 10 and 11 speed.

The Salt Short Pivotal Seat is exactly as it's name says, a shorter length pivotal style seat perfect for younger riders or 14" to 18" bikes. Plastic bumpers, slim padding and an embossed top cover make the Short Pivotal comfortable with a clean look. ###section### Product Specs TYPE: PADDING: WEIGHT: 0.6lbs (270g)

The Echo knee pad is constructed from a super tough Cordura face fabric, with an air plush lining for supreme comfort. The back side of the pad uses a dual layer Lycra design, that is soft on the inside but strong and durable on the outside.To protect your knees from impact we use SAS-TEC, soft and flexible Visoelastic foam for superior comfort but also extreme impact absorption. A Sharkskin neoprene inner section and dual strap design ensure the pad stays firmly in place. Pad Material: Breathable perforated Duratex neoprene with air plush lining, back side with dual layer soft Lycra Protection: SAS-TEC, soft and flexible...

Campagnolo’s considerations behind the available gearing ratios smooth shifting is fundamental to the design of Ekar’s gravel and all-road specific cassettes. 13 sprockets make the logic of a Road 1 x system possible. And it’s the introduction of the 9-tooth cog that makes Ekar work so perfectly for gravel and all-road riding. Not only is a wide range of gear ratios possible, but natural, progressive cadence-matching shifts are maintained, offering a uniquely satisfying ride. The range of gears offered by these cassettes match or exceed any 2x system with no wastage. Closer low gear spacing for smooth cadence progression...

The HollowTech II 11-speed Ultegra chainset offers an ideal balance of light weight and stiffness, making it the perfect choice for both enthusiast and competitive riders HollowGlide hollow outer chainring gives vast improvements in rigidity by virtually removing outer chainring flex and hugely improves shift performance, even under high load The chainring teeth have been developed to work in conjunction with 11-speed HG-EV chains for increased contact to provide greater efficiency and improved power transfer Industry leading HollowTech II cold forged 4 arm hollow cranks have been evolved for maximum rigidity while reducing...

Like the Primato but lighter! The latest incarnation of the ever popular Miche Primato cassette, now available with a greater choice of sprockets. The last position sprocket and lockring are made of AL7075-T6 Aluminium, giving reduced weight with greater strength. All middle sprockets are matt finish chromed steel. Features: Steel first sprocket with matt finish chromed steel middle sprockets Anodized last sprocket made of AL 7075-T6 AL 7075-T6 lock ring 242g (11-25)

Shimano’s 105 R7000 series might be the brand’s entry point to performance cycling, but, thanks to trickle-down technology from the premium ranges of Dura-Ace and Ultegra, it certainly isn’t sub-standard. Despite the lower price tag for these 105 shifters, you can still be assured of excellent stopping power and smooth gear changes. Whether it’s for the daily commute or your local road race, you’ll get reliable shifting performance every time. Shift Into Gear For this edition, the Japanese component makers have re-vamped the internal shifting unit to give smoother shifting than ever. The Dual Control Levers offers...

The Shadow Finest Cranks were built to cover all bases, they're strong and durable with Shadow's proprietary shape giving them a real clean look. They're built from 4130 chromoly with oversized welds adding plenty of extra reinforcement, with flat sides designed to be more ankle friendly and a rounded top making crank slides easier. A hollow 22mm, 48-spline spindle puts the power straight to your back wheel. Designed with minimlal crank offset to keep your feet more centre giving you greater control. The Shadow Finest Cranks are compatible with both LHD and RHD. ###section### Product Specs Crank Type: 3-Piece Drive...

Swissstop organic disc pads offer excellent performance in wet and dry conditions and are extremely durable. An optimum compound containing a variety of materials produces outstanding braking performance with minimum effort at the brake lever. Swissstop disc pads offer excellent performance in wet and dry conditions and are extremely durable. High quality springs are supplied with every set of Swissstop disc brake pads Supplied as pairs (for one wheel) Disc 15 Fits: Shimano Deore BR-M575, BR-M525, BR-M515, LX BR-T675, BR-M505 TRP Hylex, HY/RD, Spyre SLC Tektro Orion SL HD-M740, Orion HD-M730, HD-M725, Gemini SL HD-M520 /...

The Box Two M30-P Cranks have been designed and built around their super-stiff, cold-forged Praxis M30 spindle. It fits frames with European bottom brackets. Paired with the same oversized, hollow-forged arms and 104 BCD spider as the Box One M35 Cranks. After an independent lab test the Box One M35 and Box Two M30 came out on top in terms of stiffness compared to anything else on the market. The Box Crankset includes a Praxis M30-BSA threaded bottom bracket that is compatible with all European style bottom brackets. ###section### Product Specs Crank Type: 2-Piece Drive Type: Bolt Drive Spindle Diameter: 30mm Drive...

Designed to provide optimal chainline when using a Profile Euro Outboard bottom bracket. The Profile Spline Drive Spider Single Chainring is CNC machined from billet aluminium plate and sits over the external bearing cup, supplied with a CrMo Steel adapter insert already pressed in.

Box Two Brake Shoes have cartridge pad holders to fit 70mm replacement pads, making it easy to swap out worn pads, or for the style conscious, to change pad colors. Adding to the function, these shoes with a pivoting post, so setting them is super easy.

RS811 bottom bracket mount calliper offers an ideal balance of light weight and stiffness, making it the perfect choice for both enthusiast and competitive riders Low profile aerodynamic direct mount Super SLR-EV Dual-Pivot design provides superior brake performance and light action Must be used in conjunction with super SLR levers for correct leverage ratio Enhanced brake arch proportions give a quicker linear response and increased power Can be used on frames with bottom bracket / chainstay direct mounts Low profile outer cable stop position improves cable routing for reduced friction Cartridge brake shoes for easy replacement...

Shadow embrace the more old-school railed seat system, their Railed Seatpost comes in at 200mm long and works with all seats running the railed system. The Shadow Railed Seatpost is built from lightweight, yet strong 6061 alloy with a standard 25.4mm diameter. The Railed Seatpost fastens seats in place via the two included micro adjust bolts. ###section### Product Specs TYPE: Railed LENGTH: 200mm DIAMETER: 25.4mm WEIGHT: 184g (6.49oz)

Sometimes you just need affordable parts, whether you're just starting out or you're strapped for cash and need a replacement. Whatever the reason may be the Sunday Saker V2 Cranks will not disappoint! A 3-piece design constructed from tubular chromoly for the arms and a chromoly spindle ensuring it's a durable set. The arms feature a single pinch bolt design and the cranks can be run either RHD or LHD depending on your preference. The Sunday Saker V2 Cranks also include a 19mm Mid bottom bracket with spacers. ###section### Product Specs Crank Type: 3-Piece Drive Type: Bolt Drive Spindle Diameter: 19mm Drive Side:...

Designed to be used with 1 finger. Clamp on style means you dont have to take your grip off to install the lever. Weight: 96g / 3.4oz.

The Total Team v3 Top Load Stem has been given a subtle update that features rounded edges and a new design reducing weight and increasing strength. Made from fully CNC machined 6061 aluminium that's strong and durable, with CNC'd recesses and cut outs to help reduce the weight. ###section### Product Specs TYPE: Top Load REACH: 46 - 50mm RISE: 34mm CLAMPING DIAMETER: 22.2mm WEIGHT: 295g (10.42oz)

The Prime SR Freehub Body - XDR is a replacement star ratchet freehub body that is compatible with SRAM XDR 11/12 Speed cassettes and Prime SR1/SR2/SR1D/SR2D Hubs.

The Ultegra CN-6701 10 speed bicycle chain is a narrow, lightweight directional chain engineered to offer optimal cassette and chainset interaction and maximum power transfer for a greater cycling performance. The outer plate has been developed to reduce the chance of chain suck while the inner plate is designed to give better, more efficient contact with gears for smoother shifting under high loads, enhanced rigidity and almost silent operation. – L.R. Features: Shimano Ultegra CN-6701 10 Speed Bicycle Chain Premium quality build with a slim, lightweight design for maximum power transfer Chain uses a directional design...

Replacement Profile Flush bolts and matching washers for older Profile and Madera Cranks solid spindles. Made in the USA.

Cult's Being Grips are Brandon Begin's signature grip where he's opted for a twisted ribbed pattern opposed to the classic straight rib. Made from a soft Krayton compound rubber with a thin diameter they're comfortable, grippy and durable. Each set of Begin Grips comes with bar ends. ###section### Product Specs DIAMETER: LENGTH: 174mm PACK SIZE: 2 (Pair)

Eclat are firm believers in the simplicity of BMX parts and that is why they never go overboard when it comes to design. The Dune Oversie stem is a top loader and one of the slickest and most aesthetically pleasing in their colleciton. Its 6061-T6 alloy is cold forged with a CNC finish creating a realy sturdy unit that features a taller 31mm rise and a wide clamping area that holds your bars extra tight.

Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world The HollowTech II 11-speed single chainset offers optimum gearing for mixed terrains and riding styles Designed to work with HollowTech II type bottom bracket cups Compatible with 11-speed HG chains Anodized aluminium crank arms Lightweight aluminium chainring 4 arm, 110 mm bolt circle diameter Weight: 644 g (40T), 656 g (42T) for 170 mm

The SaltPlus Pitch Flow Tyre is a low profile street/ramp tyre designed to handle anything you can throw at them. They boast a less aggressive pattern than the SaltPlus Pitch Mid Tyre and feature knurling for improved traction. Maximum pressure: 65 psi. ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 65 PSI PACK SIZE: Single WEIGHT: 1.45lbs (658g)