BMX Sprockets

The Cinema Format Sprocket features a real clean, solid sprocket design finished with laser etched graphics. Made from fully CNC machined 6061-T6 aluminium with a 6.35mm thickness that provides all the strength and durability you could need. Features offset 1/8" teeth that provides improved chain alignment. The Cinema Reel Sprocket comes with adapters so the sprocket can be run on 19mm, 22mm and 24mm crank spindles. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 130g (4.62oz)

The Wethepeople 4Star Sprocket has been the go-to choice for many of Wethepeople's pro squad for a while now which speaks volumes to how tough this thing is. It's built from a solid 6mm thick, 6061-T6 alloy with a durable 4-spoke design that really creates that rigid strength. The 4star Sprocket can be run on 19mm, 22mm and 24mm cranks with the adapters included. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 73.7g (2.6oz)

Replacement high-impact plastic guard for Beta sprocket.

Animal's V4 Sprocket updates their classic sprocket design taking over from the V3 and still ready for the streets. Built from CNC machined, 6mm thick 6061 aluminium that's tough and durable. The Animal V4 boasts two bolt positions for improved life and can be fitted on all cranks thanks to the 19mm and 22mm adapters inculded. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 70g (2.52oz)

Wethepeople designed the Patrol Sprocket based off of classic trails sprockets from the past High-quality, full CNC 6061-T6 alloy construction keeps the minimal looking Patrol Sprocket incredibly strong, while that open design helps to keep the weight right down. The Wethepeople Patrol Sprocket comes with adapters so you can run it on 19mm, 22m or 24mm spindles. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 69g (2.42oz)

Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC

Stay Strong AXION 6061 5 Bolt Chainrings. Material: 6061 Alloy, 4mm thick, 5 Bolt design, Laser etched Stay Strong logos, Bolt recess, Sizes Available: 35T, 36T, 37T, 38T, 39T, 40T, 41T, 42T, 43T, 44T, Colour: Black, Weight - 45g ###section### Product Specs TYPE: Bolt Drive MATERIAL: Alloy WEIGHT: 45g

The Profile Bolt On Spider was designed to provide optimal chainline when paired with a Profile Euro Outboard bottom bracket. It's machined from a billet aluminium plate and comes supplied with a CrMo steel adapter insert already pressed in. The chainring can be mounted on either the inner or outer face of the spider giving you a little more chainline adjustability. ###section### Product Specs Crank Type: Drive Type: Spindle Diameter: Drive Side: Includes BB Bearings: Weight: ###shogun-image-section###

The BSD Jonesin' Sprocket V2 keeps everything that worked from the version 1 updating the only bits that Sam Jones felt needed changing. Made from super tough 7075 aluminium for durability and stability with a massive high-density, low-friction nylon guard on there for good measure adding plenty of added protection to the sprocket and your chain. That guard is kept in place with four hardened CrMo bolts. Whether you're running 19mm, 22mm or 24mm spindles on your cranks the Jonesin' V2 can run with them thanks to the supplied adapters. ###section### Product Specs TYPE: Bolt Drive MATERIAL: Aluminum WEIGHT: 190.5g...

Chainrings are CNC machined from aircraft quality billet 6061 aluminum plate. 3/32″ tooth width for use with most race or MTB chains.

The Cinema Beta Sprocket utilises a countersunk sprocket design that the guard bolts into taking strain and impact pressure off of the guard bolts. Made from super strong 8mm thick 6061-T6 aluminium for the sprocket with a high-impact, low-friction plastic material making up the guard. The guards material allows it to keep your chain protected while feeling buttery on grinds and slides. The Beta Sprocket can be run on 19mm, 22mm and 24mm spindles with the included adapters. ###section### Product Specs TYPE: Bolt on MATERIAL: Alloy WEIGHT: 178.6g (6.3oz)

Subrosa pro Simone Barraco wanted a sprocket that was strong enough to handle his creative and constant abuse when riding through his beloved city of Barcelona. The Barcelona Sprocket is made from 8mm thick 7075-T6 alloy allowing the sprocket to go through hell without bending or defroming. It is also able to fit a Shadow Conspiracy Interlock Supreme Chain. The 'Flower' of Barcelona can be found all over the city so it was only fitting that Subrosa incorporated that design into the sprocket. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 158.8g (5.6oz)

The United Rotary Sprocket is a super clean, 3-spoke design that focuses on strength. Its fuly 3D CNC machined 7075-T6 aluminium construction and 6.35mm thickness makes the Rotary Sprocket incredibly durable and strong. The 23.8mm center bore is compatible with 19mm, 22mm and 24mm spindles with the included adapters. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 70g (2.52oz)

CNC machined from aircraft quality billet 7075 aluminum plate the Profile Elite 104 BCD 4-Bolt Chainring is incredibly durable with an open design to reduce the weight as much as possible without sacrificing strength The chainring has an offset centerline and is reversible so you can dial in your chainline with ease, it's a 4-bolt design and features a 3/32″ tooth width for use with most race or MTB chains.

Affordable and durable disc sprocket from Verde. The Regent sprocket is forged and then CNC'd from 6061 aluminium and comes complete with 19mm and 22mm adapters. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC

The United MDLCLS Sprocket Guard is a direct replacement for their 'Middle Class' Sprocket, built and designed to not take anything away from the original design. The MDLCLS Guard is built from CNC machined 6061-T6 alloy to ensure it can take whatever is throw its way. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 110g (3.92oz)

Rant consistently push the mantra that everyday is a great day on your bike and it's hard to argue. Their H.A.B.D Sprocket is forged from 5mm thick 6061 alloy with a light CNC clean up, smiley face cutouts throughout the sprocket shed some weight while still retaining strength and function. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 81.6g (2.88oz)

The Kink Imprint Sprocket was designed to be balanced, always ensuring the strength is there and then figuring out how to remove weight. Fully CNC machined from 6.35mm thick 7075-T6 aluminium the Imprint has four spokes for stability with four cutouts to shave some weight. Two of the four spokes are shaved down to help remove a little more weight. The face of the Imprint Sprocket is finished with a unique machined surface pattern and comes with 19mm and 22mm adapters so you can run it on all cranks. ###section### Product Specs TYPE: Bold On MATERIAL: Aluminium WEIGHT: 69g (2.42oz)

Replacement Halfbash Guard for the Odyssey Halfbash Sprocket. ###section### Product Specs TYPE: Bolt On MATERIAL: Nylon WEIGHT: 99.8g (3.52oz)

The Markit x Demolition Sprocket is a solid style sprocket with a laser etched Markit logo. It's built from 6mm thick 7075 aluminium that's incredibly durable and super tough. Center aligned teeth allow you to run the sprocket with either side facing out, and if you want a little protection you can bolt on a nylon guard using the four bolt holes. The Markit Sprocket fits 24mm cranks without any spacer with the included adapters letting you run it on 19mm and 22mm cranks. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 70g (2.52oz)

The S&M Chain Saw Sprocket is ready to give you as much pull as possible through the woods, the street and everything in between. Made in the USA from fully CNC machined 6061 aluminium for strength with three cutouts drastically reducing weight without sacrificing strength. The 24mm center can be run on 19mm and 22mm spindles with the supplied adapters. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 99.2g (3.5oz)

Logan Balbirona's signature Terrible One Sprocket is here boasting a unique cutout pattern inspired by classic 5-spoke designs. Built from CNC machined 7075-T6 aluminium for strength and durability with a 24mm crank fitting that can be adapted to fit both 19mm and 22mm cranks with the supplied adapters. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 78g (2.82oz)

The Tall Order One Logo Sprocket is built for lightweight strength with its full 7075-T6 alloy construction. The Logo Sprocket can be run on either the right side or the left side, with 19mm and 22mm washers downsizing the 24mm center hole to fit all cranks. ###section### Product Specs TYPE: Bolt On MATERIAL: Aluminium WEIGHT: 71g (2.52oz)